Harbor Shade

Shades for your Cruiser, Yachts and Sporty
See More

Description

Measurements

Please enter your boat’s measurements in the fields below:

For measurement instructions hover over the information link next to each field

Additional information

Materials: Resilience, UV Coated, 1 yr. warranty Available Colors: Black and White The resilience fabric has an outer UV reflective coating which provides UV-protection in harsh marine environments. The UV reflective coating offers an effective UV block of 98% and it will reflect up to 75% of UV heat. The resilience material gives the shade a 20% stretch which allows it to fit many size boats while still creating a custom fit appearance. The Aft Shade can handle speeds up to 30 knots while staying whisper quiet. *Shades are not meant for permanent use and should be removed after every use. *The warranty listed is the fabric warranty; please see our warranty page for more details on your products’ entire warranty.

Install

New Installation Video Coming Soon!

Reviews

There are no reviews yet.

Be the first to review “Harbor Shade”

Your email address will not be published. Required fields are marked *

No more offers for this product!
  • Please enter Manufacturer, Model and measurements below:

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles: We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)
    Velcro Clean Up Tabs: Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.
    Carry Bag: Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles: We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)
    Velcro Clean Up Tabs: Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.
    Carry Bag: Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    7 ft. Awning - Black

    7 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    8 ft. Awning - Black

    8 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    9 ft. Awning - Black

    9 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    10 ft. Awning - Black

    10 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    11 ft. Awning - Black

    11 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    12 ft. Awning - Black

    12 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    13 ft. Awning - Black

    13 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    14 ft. Awning - Black

    14 ft. Awning - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    7 ft. Hut - Black

    7 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    8 ft. Hut - Black

    8 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    9 ft. Hut - Black

    9 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    10 ft. Hut - Black

    10 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    11 ft. Hut - Black

    11 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    12 ft. Hut - Black

    12 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    13 ft. Hut - Black

    13 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    14 ft. Hut - Black

    14 ft. Hut - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    7 ft. Canopy - Black

    7 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    8 ft. Canopy - Black

    8 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    9 ft. Canopy - Black

    9 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    10 ft. Canopy - Black

    10 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    11 ft. Canopy - Black

    11 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    12 ft. Canopy - Black

    12 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    13 ft. Canopy - Black

    13 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    14 ft. Canopy - Black

    14 ft. Canopy - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    7 ft. Pavilion - Black

    7 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    8 ft. Pavilion - Black

    8 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    9 ft. Pavilion - Black

    9 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    10 ft. Pavilion - Black

    10 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    11 ft. Pavilion - Black

    11 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    12 ft. Pavilion - Black

    12 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    13 ft. Pavilion - Black

    13 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    14 ft. Pavilion - Black

    14 ft. Pavilion - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    7 ft. Marquee - Black

    7 ft. Marquee - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    8 ft. Marquee - Black

    8 ft. Marquee - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    9 ft. Marquee - Black

    9 ft. Marquee - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    10 ft. Marquee - Black

    10 ft. Marquee - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    11 ft. Marquee - Black

    11 ft. Marquee - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    12 ft. Marquee - Black

    12 ft. Marquee - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    13 ft. Marquee - Black

    13 ft. Marquee - White

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Harbor Shade Kit Includes:

    T-Top Telescoping Poles:
    We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)

    Velcro Clean Up Tabs:
    Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.

    Carry Bag:
    Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.

    Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.

    The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)

    Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.

    14 ft. Marquee - Black

    14 ft. Marquee - White

    Your measurements may classify you for a tapered shade. Please call our office at 843-760-6101

Get Closer to LAPORTE

Subscrible to LAPORTE PRODUCTS Newsletter
Download Brochures
Find us at @laporteproducts
Find us at @laporteproducts
LaPorte Products
Sign up for updates and information about our business

    LAPORTE
    SHOP
    HELP & INFO

    Need Help?

    Call +1 (843) 760-6101

    MY ACCOUNT

    © 2024 LaPorte Products, INC. All Rights Reserved.
    x

    Search